DT-86 DINING TABLE

Available with extensions and leaves. Legs are available in metal or wood

Shown: DT 86 round

wood options 
• solid wood 
metal options 
• aluminum
 • solid bronze
DT-86 RECTANGULAR WITH 3” TABLE APRON

72"l x 36"w x 29.5" (base:24”ø/legs6”w)
80"l x 40"w x 29.5"h (base: 24”ø/legs: 6”w)
84"l x 42"w x 29.5"h (base: 30”ø/legs: 8”w)
96"l x 40"w x 29.5"h (base: 30”ø/legs: 8”w)
DT- 86 RECTANGULAR WITH 4” TABLE APRON
72"l x 36"w x 29.5"h (base: 24”ø/legs: 6”w)
80"l x 40"w x 29.5"h (base: 24”ø/legs: 6”)
84"l x 42"w x 29.5"h (base: 30”ø/legs: 8”w)
96"l x 40"w x 29.5"h (base: 30”ø/legs: 8”w)
*DT-86E with extension & one 18” leaf

DT-86 RACETRACK - 4” APRON
42”ø x 72”l x 29.5”h (base: 24”ø/legs: 6”w)
42”ø x 84”l x 29.5”h (base: 24”ø/legs: 6”w)
42”ø x 96”l x 29.5”h (base: 24”ø/legs: 6”w)
48”ø x 72”l x 29.5”h (base: 30”ø/legs: 8”w)
48”ø x 84”l x 29.5”h (base: 30”ø/legs: 8”w)
48”ø x 96”l x 29.5”h (base: 30”ø/legs: 8”w)
**DT-86E available with extension & One 18” leaf

DT-86 ROUND WITH 4” TABLE APRON
42”ø x 29.5”h (base: 24”ø/legs: 6”w),
48”ø x 29.5”h (base: 24”ø/legs: 6”w)
54”ø x 29.5”h (base: 30”ø/legs: 8”w)
60”ø x 29.5”h (base: 36”ø/legs: 9”w)
66”ø x 29.5”h (base: 36”ø/legs: 9”w)
** DT-86E available with extension & One 18” leaf
DT-86 RACETRACK 4” APRON
DT-86 RECTANGLE 3" APRON
DT-86 ROUND 4” APRON

• clearance from floor to bottom of table top is 25.5”
• clearance from floor to bottom of table is 25”
• leaves are for occasional use only. keeping the table extended with the leaves in at all times is not recommended as this could cause the table top to sag over time (due to its weight & gravity)
• a retractable, drop down leg is necessary to support the table halves when the 60” is opened. tables ordered in the 60” size will automatically be fabricated with this additional leg
• clearance from floor to bottom of table is 25.5”
• wood grain runs the length of the table top
• clearance from floor to bottom of table is 25.5”
• wood grain runs across the width of the table (not along the length)
• leaves are for occasional use only. keeping the table extended with the leaves in at all times is not recommended as this could cause the table top to sag over time (due to its weight & gravity)
• a retractable, drop down leg is necessary to support the table halves when the 60” is opened. tables ordered inthe 60” size will automatically be fabricated with this additional leg
• clearance from floor to bottom of table is 26.5”
• wood grain runs across the width of the table (not along the length)
• clearance from floor to bottom of table is 25.5”
• wood grain runs across the width of the table (not along the length)
• leaves are for occasional use only. keeping the table extended with the leaves in at all times is not recommended as this could cause the table top to sag over time (due to its weight & gravity).
• a retractable, drop down leg is necessary to support the table halves when the 60” is opened. tables ordered in the 60” size will automatically be fabricated with this additional leg.